10000 Litre GRP Sectional Water Tank

10000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly. The internal divider creates two isolated compartments within a single tank ...10000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides.

Modular construction utilising bolt together panels suitable for on-site assembly. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank. Please note: divided tanks are essentially two separate tanks therefore require double the quantity of connections, i.e.

2 x inlet connections 2 x outlet connections to the down services. . Insulated and WRAS approved for use with potable water.

Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. IFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab.

. IFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height andor 350 mm above any raised float valve housing. .

Screened lid vent Screened overflow 22 mm up to 4 Screened warning pipe 22 mm BSP female tank connector 1 up to 4 Lid mounted level switch to suit high or low warning Temperature sensor. An Internally Flanged Base Tank IFB is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation. Applications where there is sufficient working room all around the tank.

Comprising: Internally flanged base, externally flanged sides, internally flanged roof. . Insulated to the sides and cover only.

. . PW.5x2x1.

IFB-AG.DIV 2.52.5 Dimensions. Airgap AG Single or twin compartment Divided Twin - 2 No. 2500 x 2000 x 1000 mm External Dimensions 5150 x 2150 x 1250 mm high Assembly area required 6150 x 3150 x 1750 mm high .

.