Biostrip 20 Paint Stripper

Non Toxic Water based product, safer than traditional chlorinated solvents Thickened Product - No Drips, No Waste. Easy to use, highly economical each 500ml will clear approximately 2-3 square metres. .

Low Odour Biostrip 20 is easy to use and safe. With high quality and proven ...Non Toxic Water based product, safer than traditional chlorinated solvents Thickened Product - No Drips, No Waste. Easy to use, highly economical each 500ml will clear approximately 2-3 square metres.

. Low Odour Biostrip 20 is easy to use and safe. With high quality and proven performance it can be used in most situations to remove paint, varnish, primer etc from a wide range of surfaces.

Water based solution providing a more ecological approach to paint and varnish stripping. Biostrip 20 can remove : Water Based Paints (emulsion, acrylic etc). Oil Based Paints (gloss, radiator etc).

Primers (standard, chrome, aerospace etc). Suitable for use on the following surfaces : Soft and Hard Wood, Stone, Brick, Concrete, Masonry uPVC, Metals, Glass. Directions for Usage: Step 1: Brush evenly onto paint that you intend to remove.

Step 2: Leave in place until the paint blisters or softens Step 3: Once it has completely softened it can be removed using a scraper, cloth or power washer Step 4: Wash area down with fresh soapy water Repeat as required. 500ml should cover a surface of approximately 2-3 square metres. Depending upon the paint type and number of layers of paint present you may need to repeat the application in some areas Top Tip: Let Biostrip do the hard work, as long as it's not allowed to dry out it will continue to work.

Cover the applied area with polythene or clingfilm. Leave 24 hours before removing. Biostrip can be used on most general plastics.

Note: Biostrip 20 is not suitable for removing bicyle/automotive paint.