C-Tec Hush Activ Grade C Domestic Fire Alarm Kit

A new Grade C domestic fire detection and alarm system to BS 5839-6 (2019) for use in individual flats, houses and apartments. The HAK/1 Kit Includes: 1 x Double Gang Hush-ActiV Controller c/w 72 hour standby battery 1 x Double Gang 230V/24V 250mA PSU 1 x ActiV multi sensor 1 x ...A new Grade C domestic fire detection and alarm system to BS 5839-6 (2019) for use in individual flats, houses and apartments. The HAK/1 Kit Includes: 1 x Double Gang Hush-ActiV Controller c/w 72 hour standby battery 1 x Double Gang 230V/24V 250mA PSU 1 x ActiV multi sensor 1 x ActiV smoke detector 1 x ActiV 60oC heat detector 3 x ActiV diode detector bases 1 x ActiV base sounder 1 x lid for base sounder Optional decor plates available for use with ceiling mounted ActiV devices to cover the decorating marks left when used to retrofit older Grade D alarm devices.

Watch the Video Why Hush-ActiV? SAFER Raises the typical level of fire protection in a dwelling from BS 5839-6 Grade D (unmonitored Mains/Battery Alarms) to Grade C (monitored wiring and a central controller) EASY-TO-ACCESS USER CONTROLS No need to stand on a chair to Test or Hush/Silence devices SECURE MONITORED WIRING All field wiring monitored for open and short circuit faults ENVIRONMENTALLY FRIENDLY Up to 50% reduction in the mains power consumption of a typical Grade D system, less plastic and only one replaceable lithium-ion battery per system providing over 72 hours standby REDUCED LIFETIME OWNERSHIP COSTS Separate fire detectors and sounders are less expensive to replace than Mains/Battery Alarms and all smoke detectors have built-in drift compensation to increase service life expectancy NO INTRUSIVE BS 5839-1 MAINTENANCE VISITS Monthly user/occupant test is sufficient DIRECT GRADE D SYSTEM UPGRADES Utilises the same wiring scheme as most Mains/Battery Alarm solutions Hush-ActiV Operation Press HUSH when there is an Unwanted Alarm to silence the system for 2 minutes (extendable by a further 2 minutes if the Alarm has not cleared). Press TEST for 3 seconds when the system is in its normal state to briefly sound the Alarm sounder(s). BS 5839-6 2019 recommends this test is carried out by occupants at least once a month.

Press HUSH when a wiring or battery fault is detected to silence the fault buzzer for 24 hours. Occupants should report the fault to the responsible person/service engineer at their earliest convenience. Press HUSH when the system is in its normal state to deactivate alarm detection for 15 minutes (’hot works’ function).