Diameter 2 Flute Up Cut Ball Nose Carbide Router for Wood

These 2 Flute Up Cut Ball Nose Spiral Routing Cutters made from Solid Carbide and offer high chip removal and will leave a good quality finish chips are pushed away from the work piece. Good for 3D cutting and contouring or forming rounded bottom U shaped fluted chanels on Panels ...These 2 Flute Up Cut Ball Nose Spiral Routing Cutters made from Solid Carbide and offer high chip removal and will leave a good quality finish chips are pushed away from the work piece. Good for 3D cutting and contouring or forming rounded bottom U shaped fluted chanels on Panels, Boards, Counter Tops etc.

Suitable for use on Hardwood, Softwood MDF, Laminate Board, Plywood, Particle Board and other Sheeting, Insulation Panels, PVC and Acrylic. Use lower feed rate when depth of cut increases, choose cutters with the shortest flute length that are suitable for the job with as little overhang as possible. Clearance of cutting chips may be required.

Suitable for CNC, hand held and desktop routers. Made from wear resistant Uncoated Carbide for increased tool life. Dimensions for EUC2B-10103275 Cutting Diameter Length of Cut Overall Length Shank Diameter 10mm 32mm 75mm 10mm Speeds and Feeds, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.

When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible. Acrylic Aluminium Alloy Hard Plastic Hardwood Laminate RPM 18000 Feed 11000 mm/min RPM 18000 Feed 7500 mm/min RPM 18000 Feed 10000 mm/min RPM 18000 Feed 17000 mm/min RPM 18000 Feed 17000 mm/min Particle Board MDF Phenolic Soft Plastic Plywood Solid Surface RPM 18000 Feed 21000 mm/min RPM 18000 Feed 17000 mm/min RPM 18000 Feed 11000 mm/min RPM 18000 Feed 18000 mm/min RPM 18000 Feed 9500 mm/min