Electronic Lighting Ballast

ClickLUX LED continuous row lighting system, electronic lighting ballast, 8700 lm, 5000 K. Supplied = assembled. Product type = ceiling lamps.

Bulb = LED. Power = 56 W. Luminous flux = 8700 lumen.

Luminous colour = neutral white. Colour temperature = 5000 K. Mains voltage = 220 ...ClickLUX LED continuous row lighting system, electronic lighting ballast, 8700 lm, 5000 K.

Supplied = assembled. Product type = ceiling lamps. Bulb = LED.

Power = 56 W. Luminous flux = 8700 lumen. Luminous colour = neutral white.

Colour temperature = 5000 K. Mains voltage = 220 - 240 V / 50 - 60 Hz. Protection type = IP40.

Operating life = 100.000 hrs. Max. brightness = 0 lux.

Beam angle = 90 °. Colour reproduction index = 80. Length = 1528 mm.

Width = 67 mm. Height = 28 mm. Material = aluminium.

Continuous row lighting refurbishment unit - installed in just 3 clicks. Clever LED strip light refurbishment system. Compatible with more than 80% of commercially available T5/T8 support rail systems (see PDF).

Tool free replacement of your old device rack. Phase and light output can be adjusted using slide switch. Service life approx.

50,000 hours. LED strip light module suitable for universal use in indoor areas. Straightforward, fast installation on mounting rails from Siteco, Ridi, Regiolux, Philips, Ludwig, Zumtobel, Trilux and other manufacturers.

Dummy covers and connection cables are available for empty panels. Connection with ClickLUX connector plug, 7 pin, optionally available. Light output can be set using DIP switch (100%, 75%, 50%).

With phase shift. Suitable as a replacement for a conventional single or twin lamp T8/T5 continuous row lighting system. Through-wiring.

Optimum light guidance due to lens technology. High quality aluminium housing. Flicker free.

Sliding mounting clamps are secured to the lamp. Long service life, high luminous flux, good colour rendition. Particularly uniform light distribution.

Low maintenance requirements. Energy savings of up to 50% compared to a conventional continuous row lighting systems. Shatter proof, suitable for use in IFS certified areas.

Phase (L1 / L2 / L3) and light output (100 / 75 / 50%) can be adjusted using a slide switch. Ingress protection IP40. Colour rendering index >80.

Rated voltage 220 - 240 V AC, 50/60 Hz.