Everest Trade Barn Paint

KEY FEATURES AND BENEFITS Highly durable solvent based paint Industrial quality Heavy duty and long lasting High durability and is easy to clean Prevents corrosion and rust formation Brushable and sprayable An oxide gloss based on a synthetic alkyd resin Any products compatible ...KEY FEATURES AND BENEFITS Highly durable solvent based paint Industrial quality Heavy duty and long lasting High durability and is easy to clean Prevents corrosion and rust formation Brushable and sprayable An oxide gloss based on a synthetic alkyd resin Any products compatible with this item will be highlighted in Blue, Click the link to view. PRODUCT DESCRIPTION Everest Trade Paints - Agricultural and Industrial Barn and Shed Paint is a highly durable , solvent-based paint made from a heavy-duty, synthetic alkyd resin ensuring a long-lasting, durable coating. Designed for use on metal, wood, concrete and other substrates (see below) on the exterior and interior cladding of agricultural barns, sheds, industrial units, factories and various other buildings.

Available in a large range of colours, finishes and sizes with custom colour tinting available on larger orders. This product is designed to be tough and durable paint which will provide an easily cleanable coating while protecting the surface from rust and weather damage. Can be easily applied by brush, roller or airless sprayer to metal cladding and other surfaces including wood, concrete and brickwork.

SURFACE PREPARATION Ensure all surfaces are sound and clean, free from dust and flaking paint. Ensure surface is completely dry and free from condensation and damp. Remove any loose or flaking paint.

Areas of bare, uncoated metal or areas with exposed rust should be primed with a coat of Everest Trade - Anti-Corrosive Oxide Primer for maximum adhesion. SUITABLE SUBSTRATES Wood, metal, concrete, brickwork and other porous substrates. SPREADING RATE (Coverage) Approximately 6 - 8 square metres per litre, per coat.

* *This varies, apply in thin even coats to ensure maximum durability and lower drying times. DRYING TIME Touch Dry: 6-8 hours at 18°C Overcoatable: 6-8 hours at 18°C Fully Cured: 7 days at 18°C APPLICATION Brush, Roller, or Airless and compressor sprayer. Mix thoroughly before use with a paddle mixer drill attachment.

Two coats should be applied thinly and evenly to provide maximum protection and to achieve lower drying times. Make sure the surface is 100% dry and free from any moisture or contaminants before application. STORAGE PRECAUTIONS Store away from heat and flames.

For long term storage, keep away from frost. Secure lid between uses to prevent paint hardening. COMPATIBLE PRIMER The primer to be used with this product is Everest Trade - Anti-Corrosive - Metal Oxide Primer Paint.

C LEANER / THINNERS This product can be thinned with standard White spirits, thinning should only be done if the product is being sprayed and the sprayer is unable to spray the product un-thinned. Up to 15% white spirits can be added, try and add as little white spirits as possible until spraying is possible to ensure maximum quality. Cleaning brushes and equipment should be done with White spirits.

This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.