Health and Care Dental Mirror with Handle

Mirror diameters available in the following diameters: 8mm 10mm 12mm 14mm 16mm 18mm 20mm 22mm 24mm 26mm 28mm 30mm Quality Assurance All Health and Care surgical instruments are theatre quality, and are manufactured in the UK to the highest standards in accordance with British ...Mirror diameters available in the following diameters: 8mm 10mm 12mm 14mm 16mm 18mm 20mm 22mm 24mm 26mm 28mm 30mm Quality Assurance All Health and Care surgical instruments are theatre quality, and are manufactured in the UK to the highest standards in accordance with British Standard accreditation ISO 9001:2000, ISO 13485:2003 and 93 / 42 / EEC. Health and Care surgical instruments are fully reusable. It is recommended that electrosurgical instruments and leads are serviced after every 40 uses and that leads are visually inspected prior to every use.

For example, a typical forceps or scissors repair service would include dismantling, cleaning, reassembling, replacing rivets, sharpening and full testing. Stainless Steel Grades Health and Care surgical instruments are manufactured using the correct grades of stainless steels specified in BSENISO7153-1:2001 and these are listed below. In this standard, the grades of stainless steel are given a “Reference Letter” which cross references the grades of material.

Grade A, B and C would be generally described as 410 / 420 types and are extensively used for dental and surgical instruments. They are used for applications where cutting edges, wear resistance and strength are required. Long service lives should be expected from martensitic stainless steel dental and surgical instruments, properly manufactured and subjected to appropriate cleaning procedures.

Health and Care instruments use the following grades: Artery Forceps and Clamps Grade B, AISI 420 S29 (AISI 420, SUS 420 J1) Dissecting Forceps Grade B, AISI 420 S29 (AISI 420, SUS 420 J1) Scissors and SuperCut Scissors Grade C, AISI 420 S45 (AISI 420, SUS 420 J2) Osteotomes, Chisels and Cutting Edge Single Instruments Grade C, AISI 420 S45 (AISI 420) Cool/warm detergent below coagulation temperature (below 60 degree C) Hot wash disinfection (above 71 degrees C for 3 minutes in all part of load). Final rinse in purified water.