HMG Gloss Topcoat for Metal

This is a top coat to go over primed metal substrates with a gloss finish in the colour of your choice. It has a 2 to 3 hour dry time and can be applied by spray, brush or roller. Particular benefits over other faster drying enamels are that it has a low odour, a longer wet edge ...This is a top coat to go over primed metal substrates with a gloss finish in the colour of your choice.

It has a 2 to 3 hour dry time and can be applied by spray, brush or roller. Particular benefits over other faster drying enamels are that it has a low odour, a longer wet edge, higher flash point, and can easily be re-coated. Can also be used as a fast drying refurbishment or maintenance brushing enamel on items such as machinery, fixed plant, movable equipment, fork lift trucks, trolleys, frames, guards etc.

Outside buildings, exteriors of tanks, pipework, process plant, towers, bridges, or any structure which is not part of a building. Gates & railings, wrought iron-work, Garden furniture. Lawn mowers and general garden machinery.

Coach, classic car, bus and camper-van restorations PREPARATION Surfaces must be dry sound and free from dirt, dust and grease. For spray application primer with Manor Fast Primer or similar and for brush application prime/undercoat with Manor Metal Primer or CV Primer Undercoat. Previously painted glossy surfaces should be lightly abraded prior to application to promote adhesion.

An extensive range of BS, RAL and other colours are available from The Mixing Room which is Avenue Groups Tinting service. Professional use only.