Memkey 4-in-1 Wall Detector

Wide Application: This stud finder can help you detect the center position of the wooden stud in walls made of wooden boards and plasterboard, as well as the position of metal and AC cables, so that you can accurately install TVs and cabinets, drill holes in the wall, etc. 4-in-1 ...Wide Application: This stud finder can help you detect the center position of the wooden stud in walls made of wooden boards and plasterboard, as well as the position of metal and AC cables, so that you can accurately install TVs and cabinets, drill holes in the wall, etc. 4-in-1 Detection Mode: This stud finder has 4 different modes that can be switched: stud scan, depth mode, metal scan and AC scan.

Multifunctional: Stud scan is used to find and locate the center and edge of wooden and metal studs with a depth of 19mm; the maximum positioning depth of depth scan is 38mm; the maximum metal detection depth is 60mm; AC scanning can detect AC cables with a depth of 51mm. Screen Display and Alarm Message: During the detection process, the screen displays the detection mode, signal strength, direction indication, etc. In addition, the intensity of the buzzer varies depending on the distance between you and the target.

You can mark the position where the sound is loudest with a marker. And it has an AC warning function. Easy to calibrate:You need to calibrate the detector before each scan.

You first select the mode and then press and hold the scan button (on the right side of the tool) to calibrate the tool. The calibration is completed when the dim bar disappears and a beep sounds. In metal/AC mode, you need to put it in air to calibrate.

Product Description Wide Application This finder can be used to detect the position of the center of the wooden stick in the walls of wooden boards and plasterboards, as well as the position of metal and AC cables, so that you can accurately install TVs, cabinets, holes in the wall, etc. How to Calibrate You need to calibrate the detector before each scan. You first select the mode and then press and hold the scan button (on the right side of the tool) to calibrate the tool.

Calibration is complete when the dim bar disappears and a beep sounds. If you accidentally shake the scanner, you need to recalibrate the device. In metal/AC mode, you need to put it in the air to calibrate.

Specification Color: Black and Silver Package Included: p> Wall Detector*1 Battery*1