Neoperl M20 Male Eco Tap Aerator

Neoperl Tap Aerators – The Simple And Cost Effective Way To Use Up To 60% Less Water Sustainable Savings – Many older taps can flow up to 18 litres a minute. Imagine how much water and energy is wasted if the taps are left running. This simple and cost-effective solution is ...Neoperl Tap Aerators – The Simple And Cost Effective Way To Use Up To 60% Less Water Sustainable Savings – Many older taps can flow up to 18 litres a minute.

Imagine how much water and energy is wasted if the taps are left running. This simple and cost-effective solution is guaranteed to make your tap outlet more water and energy efficient, potentially reducing the amount of water you use by more than 60%. No Reduction In Water Pressure – Our water and energy saving tap aerator will reduce the flow rate on your taps to just 5 litres a minute without reducing water pressure or affecting the wash and rinse effect.

Chemical Free Cleaning: Smart Lime Cleaning (SLC) Technology – A quick rub over the silicon end effortlessly removes limescale build up and helps maintain soft and bubbly champagne flow. DIY Fit In Minutes: Universal Fit – The tap aerator is easy to retro fit in a matter of minutes and fits up to 85% of taps. £1.95).

Use this simple tool to measure the flow rate of your existing taps before and after installing the Eco Tap Aerator, and instantly see the savings. Please note: This aerator is a 20mm male fitting and smaller than most standard tap aerator fittings. Please be sure to measure the diameter of your existing housing.

FAQ’s and other important information: I have a black plastic aerator on my tap, will these aerators be suitable? Unfortunately, the black plastic aerators seal horizontally with an o-ring, whereas our tap aerators seal vertically with a rubber washer. This generally makes them incompatible with our aerators as they do not create a watertight seal and water can escape around the edge of the aerator. The thread gauge on a black plastic aerator tends to be different to that on our metal housings also.

My tap has a separate hot & cold feed inside the spout, will these aerators be suitable? Unfortunately, because our aerators are slightly domed on the top it interferes with the separate feed within the spout making them incompatible. Legionnaires’ Disease: Essential guidance