Nuprol 7.4 Lipo Battery

Brand Nuprol EAN 5056444719805 MSRP (UK) Chemistry LiPo - Lithium Polymer Capacity 1000mAh Voltage (Cell Count) 7.4v (2S) Constant Discharge (@ Max Current) 20c @ 20A Burst Discharge (@ Max Current) 40c @ 40A Watt Hours 7.40Wh Connector Deans / T-Connector Balance Connector JST-XH ...Brand Nuprol EAN 5056444719805 MSRP (UK) Chemistry LiPo - Lithium Polymer Capacity 1000mAh Voltage (Cell Count) 7.4v (2S) Constant Discharge (@ Max Current) 20c @ 20A Burst Discharge (@ Max Current) 40c @ 40A Watt Hours 7.40Wh Connector Deans / T-Connector Balance Connector JST-XH Cable Gauge AWG 16 Configuration AK (Slim Stick) Weight (g) 63 Dimensions 10 x 15 x 169 cm NUPROL POWER The batteries found in Nuprols “NP POWER” range have been specifically designed to support the hobby-enthusiast sectors that include Airsoft, RC Models & UAVs. With well over 100 variants in the range from small 300mAh HPA batteries through to the massive multi-rotor UAV 16,000mAh power houses, all batteries utilise modern battery-cell technology and undergo excessive quality-control checks to deliver first-class performance time and again. LiPo batteries have a very high energy density, meaning more stored energy vs its size/ weight.

This allows for more powerful batteries with long charge times able to be fitted to models/ replicas where space & weight are at a premium. The lightest rechargeable battery technology vs its capacity Very High discharge rates for devices requiring rapid bursts of energy A low self-discharge rate when in storage (approx. 5-10% per month) Fast recharge times NOTE: LiPo batteries must be treated with care and attention.

Any damage can cause the battery cells to swell/ overheat and must be disposed of. Special care must be taken when storing & charging LiPo batteries – always use a Fire Retardant Charging Bag when charging and for long-term storage. LiPo Safe Use Warning WARNING – Strict instructions must be followed to ensure the safe use of Lithium-Polymer Cell batteries.

Use a LiPo Balance Charger ONLY! Ensure the Balance Lead is connected when charging. Always use a Fire-Retardant LiPo Charging Bag when Charging Battery. Never leave LiPo Batteries charging unattended.

Always check cell voltages before and after charging - Minimum Cell Voltage (3.3v), Maximum Cell Voltage (4.2v). Maximum Charing Current of 3C. In the event that Battery Cells show signs of swelling/ expansion or the surface temperature is in excess of 70°c you must disconnect and stop using the battery.

Failure to comply may result in the rapid venting of the battery cells which can lead to fire and explosions.