Phono Preamplifier

Cayin CS-6PH tube phono preamplifier Read test, please click hier! Verdict: ' A very special phono preamp with tonal distinctiveness, a very smooth and fluid gait. A lot of phono for the money!' Tube phono preamplifier - for vinyl fans For discerning vinyl fans, Cayin developed ...Cayin CS-6PH tube phono preamplifier Read test, please click hier! Verdict: ' A very special phono preamp with tonal distinctiveness, a very smooth and fluid gait. A lot of phono for the money!' Tube phono preamplifier - for vinyl fans For discerning vinyl fans, Cayin developed the CS-6PH tube phono preamplifier, which offers two phono inputs for high-quality MM and MC cartridges.

It allows the connection of multi-arm turntables with two different cartridges or two turntables, each using an MM or MC system. The inputs can be selected on the solid aluminum front panel. Selected tube squad In the CS-6PH, two 6922 from Electro Harmonix are responsible for the MC amplification, two ECC83 from JJ Electronics are used for the MM amplification with high-precision RIAA equalization.

Two 12AT7 take over the output stage. Two RCA 22DE4 tubes are used for voltage rectification and minimize the residual ripple. Made-to-measure reinforcement: A three-stage LOW / MED / HIGH gain switch is located on the front of the Cayin CS-6PH, which is available in black or silver.

Here the gain can be increased from 40 d - B to 57 d - B, 61 d - B or 65 d - B. The 40 d - B setting is normally intended for moving magnet cartridges and the 57 d - B, 61 d - B and 65 d - B gain settings for moving coil cartridges. Adjustable input impedance and capacitance: The CS-6PH is factory set to 40 d - B and 47 k - Ohm / 47 p - F for MM.

With the CAP switch on the front, users can set the input capacitance from MM to 47p - F or 100p - F. The input impedance of MC can be adjusted to the needs of each pickup with the impedance selector switch: 47 ohms, 100 ohms, 200 ohms, 470 ohms and 1000 ohms. A low-pass filter, which prevents high membrane deflections due to low frequencies as a result of wavy plates, can be activated via the rumble switch.

Versatile outputs: The Cayin CS-6PH offers both a balanced and an unbalanced analog output to which a variety of amplifiers can be connected. Complex power supply: With more than 20 years of experience building tube amplifiers, Cayin has always developed its own transformers. The designers have designed an EI power transformer for the power supply for the CS-6PH.

In connection with a low-noise voltage regulation, the CS-6PH guarantees a pure, low-interference and stable amplification. Handcrafted Precision: Every CS-6PH phono preamplifier is assembled by hand at Cayin by highly qualified technicians. A final multi-level quality and hearing test not only checks every function, but also ensures that the sound corresponds to the reference standard.

High quality components: The Cayin CS-6PH uses capacitors and carbon film resistors in audio quality, a large EI transformer for the power supply, ceramic tube sockets and high-end relays. Easy handling: All setting options of the CS-6PH can be made using switches on the front to enable the customer to operate and select easily. The Cayin CS-6PH remembers the last settings after switching off.

When the device is switched on, it takes over again. One safe thing: To operate the amplifier safely, Cayin implemented a soft start circuit. After the 60-second warm-up phase, the CS-6PH works in a stable and optimal condition.

A visually attractive, easy-to-install tube cover is included. Specifications: Output voltage: 200m - V (20m - V Max) 200m - V (20m - V Max) Gain factor: 40dB57dB / 61d - B / 65d - B Total harmonic distortion (THD): 0.05% (1k - Hz) 0.1% (1k - Hz) External voltage ratio: 85d - B (A-weighting) 70d - B (A-weighting) Input impedance: 47 k - Ω47/100/200/470/1000 Ω Input sensitivity (RMS): 2.5m - V (200m - V, 1k - Hz) 0.12m - V ~ 0.25m - V (200m - V, 1k - Hz) Input capacitance: 47p - F / 100pF56pF Tubes: 2 x 6922, 2 x 12AX7, 2 x 12AT7, 2 x RCA22DE4 Inputs: 1 x RCA, 1 x RCA Outputs: 1 x RCA, 1 x XLR Output Impedance: 200Ω RCA (Unbalanced), 600Ω XLR (Balanced) Front panel: silver or black Dimensions (W x D x H): 360 x 309.5 x 177 mm Weight: 11.5Kg Max. Power consumption: 62W