Professional Nibble Metal Cutter

Feature: Ergonomic handle design for more comfort. Double metal, fits any electric or pneumatic drill. A practical and perfect alternative to traditional electric or pneumatic nibbler.

Double cutting and 360 degree adjustable. Compact size, easy to use and labor-saving. Excellent ...Feature: Ergonomic handle design for more comfort.

Double metal, fits any electric or pneumatic drill. A practical and perfect alternative to traditional electric or pneumatic nibbler. Double cutting and 360 degree adjustable.

Compact size, easy to use and labor-saving. Excellent cutting effect without burrs or edges. It should be used with 8mm electric drill or pneumatic drill.

Suitable for car repair and maintenance and sheet metal production. Specification: Model: YT-160A Cutting Capacity: Steel sheet: less than equal to 1.8mm Stainless steel plate: less than equal to 1.2mm Plate Copper / Aluminum: Less than 2mm Plastic / Fiberboard: Less than 2mm Speed: 1500-3000rpm/min Color: Silver + Black Material: Metal Size: 18 x 5.1 x 7.8cm / 7inch x 2inch x 3inch (L*W*H) Diameter: 10.5mm Minimum Cutting Diameter: 12mm Instructions for Use: 1. When using the thin plate opener, first insert the drill bit end and the cutter into the round hole of the opener, connect the cutter to the electric drill and lock it firmly, then tighten the screws of the three branches.

on the shelf to prevent the hole opener from slipping; Place the left and right positioning pins into the hole of the shelf, then adjust and tighten the upper screw according to the size of the arc to be cut, and then fix the ruler to ensure the accuracy of the round holes. 2. When cutting the standard arc, please use a thin plate opener to keep the circular cutting smooth and beautiful.

It is also necessary to drill a 3mm positioning eye, then drill a 12mm hole and insert the cutter into the hole to cut the inner and outer circles. Operational requirement: 1. It is important to grease the edge of the blade often, especially for cutting aluminum plates.

2. Open the electric drill and then use, after finishing, exit and then close. 3.

When cutting, the cutting edge of the rod must be perpendicular to the object to be cut to prevent the hard rod from breaking. 4. Tool bar replacement: Open the cover, remove the anti-loosening nut, loosen the adjustment screw, remove the tool bar with pliers and reinstall it.

5. Tool holder replacement: Unscrew the compression cap counterclockwise and replace it with a new one. Package Contents: 1x Wrench 1x Nibbler Cutter Only the above package content, other products are not included.

Note: Shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.