RGB LED Strip 5M Roll IP68 Waterproof 24V 14.4W/m SMD5050

Commercial high-grade waterproof IP68 24V RGB LED strip 14.4W/m – 24V DC – 5m roll – 60 LEDs/m – IP68 (Waterproof) – 4-wire cable (15cm on each side of the strip roll) The RGB LED strips are powered by high-quality quad SMD5050 LED chips which generate a brightness of 1080Lm/m and ...Commercial high-grade waterproof IP68 24V RGB LED strip 14.4W/m – 24V DC – 5m roll – 60 LEDs/m – IP68 (Waterproof) – 4-wire cable (15cm on each side of the strip roll) The RGB LED strips are powered by high-quality quad SMD5050 LED chips which generate a brightness of 1080Lm/m and vivid colours. The strip can be cut every 6 LEDs (10mm). Please do NOT connect more than 5 meters of a LED strip in series.

A LED strip of more than 5 meters in length is overloaded due to the increased amount of current passing through, resulting in the damage of the PCB and the failure of the LED strip. Thus, when 5 meters of the LED strip is exceeded, it is suggested to connect the strip directly to the LED controller using a 4-core cable. Installation hints and tips for LED strips can be downloaded from the attachments tab.

The RGB LED strip comes with a 15cm wire ending (4-core) on each side of the strip roll. Please select a suitable PWM LED dimmer/controller to ensure the proper dimming of the LED strip. All Hi-Line RGB and RGBW LED strips are fully compatible with Fibaro RGBW LED Controller, Rako or ANY common anode LED controller available on the market.

The stated price is for 1 x 5-meter roll RGB LED strip with 300 SMD5050 LEDs – IP68 (Waterproof), 24V DC. Selection of the LED driver depending on the maximum LED strip length The table below shows the maximum LED strip length, which can be operated with a given LED driver. To consider the performance drop, which occurs in the power supply cable and the efficiency of the LED Driver, 20% was deducted from the maximum strip length in the table below.

Note that, for driving RGB LED Strips, you will have to combine the LED Driver with an RGB/RGBW LED Controller. In such case, the LED driver is not required to be dimmable. Brightness control (dimming) and colour adjustment is still possible through the LED controller.