Timloc Loft Access Door Hinged White

Product Features Air permeability measured at 50Pa as 0.00m3 (h.m2) under positive pressure test conditions. Purpose made product saves time and money compared with traditional joiner-made timber loft access doors. Independently air leakage tested by BRE.

Excellent aesthetic ...Product Features Air permeability measured at 50Pa as 0.00m3 (h.m2) under positive pressure test conditions. Purpose made product saves time and money compared with traditional joiner-made timber loft access doors. Independently air leakage tested by BRE.

Excellent aesthetic appearance. Factory finished and ready to fit straight from the box. Insulated door panel with integral draught/vapour seal.

Maintenance free, no need to paint. Hinged design allows use of a telescopic loft ladder. Acoustic performance of 30dB.

Quality and Material Satisfies all NHBC requirements. Manufactured to BS EN ISO 9001 and BS EN ISO 14001. Complies with Building Reg.

document L1A & L2A (2013 Edition). Meets all relevant British Standards. The door and frame are one piece injection moulded polypropylene.

Insulation is CFC free expanded polystyrene foam. Door and frame available in white only RAL 9010. Installation Instructions This product is designed to fit between 38mm thick trussed rafters or ceiling joists spaced at 600mm centres which provide a clear joist opening width of 562mm.

If the roof design does not provide this joist opening width, a suitable opening must be formed. Trimmers must be installed across the ends of the frame. These must be spaced to give a clear opening length of 662mm.

The frame fixes with ten screws, three through each side and two through each end. Fit the loft access door after the ceiling has been plaster boarded and skimmed. The frame must be a good fit into the trimmed opening.

Never try to force it into an opening that is too small. If the opening is too large use packers to ensure a good fit.