Tlily 2X Car Parking 4 Way 360 Degree Panoramic Rear View System Control Box

Automatic round view at startup: When the car engine starts, the system will activate the car monitor and all the cameras around one by one to check the view for 10 seconds, then turn off. Automatic rear view: When you pull the reverse gear (left/right rotation not triggered), the ...Automatic round view at startup: When the car engine starts, the system will activate the car monitor and all the cameras around one by one to check the view for 10 seconds, then turn off. Automatic rear view: When you pull the reverse gear (left/right rotation not triggered), the system will activate the monitor and rear view camera until the reverse gear, then switch to the view camera for 10 seconds, then turn off.

Front view mode: The system will start with front view mode by default. Front view controlled by the switch (included). Press the control switch for 2 seconds, the car monitor and car view camera will work all the time, if no other trigger works.

And then you can turn off the front view video by pressing the control switch again for 2 seconds. Side view mode: Press the control switch less than 1 second to enter side view mode. When you turn on the rotary switch, system will activate the monitor and side view camera (the left/right side view camera is controlled by the left/right steering lamp).

The monitor and camera will turn off after 1.5 seconds when the steering turn is completed. Press the control switch again less than 1 second to switch to view mode Description: Video Output: Two video outputs, one for car monitor, the other for car DVR. View Camera Power: Supplied by control box system.

Rear View Camera Power: Supplied by control box system, or could be powered by reverse lamp power. Left/Right Side View Camera Power: Supplied by control box system Trigger Priority: Right View - Left View - Rear View - View Switch Function: Press for less than 1 second: Side View Mode / View Mode Press for 2 seconds (in mode): View always on / View off Parameters: The system working current: Max: 50MA. (Excludes the working current of cameras) The system working power: 9-30V.

(The power supply of cameras is the same as the system input voltage, in 24V vehicle, please use 24V cameras) System signal: PAL / NTSC / SECAM Video output: 1.0VPP / 75 Color: Black Material: ABS Package Contents: 2 x Host 8 x Camera Extension Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in a little different from the real thing. The measurement allowed error is +/- 1-3 cm.